Order Products : sales@su-jiao.com
REVODE 101
| Category: | PLA , Polylactic Acid |
| Manufacturer: | Zhejiang Hisun Biomaterials Co.,Ltd |
| Trademark: | REVODE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4kGqeA_REVODE-101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hisun Biomaterials PLA polymer REVODE101 is a thermoplastic resin derived from annually renewable resources and is specifically designed for sheet extrusion applications. Many products can be produced from REVODE101, and the application field of this resin is extended gradually. Suitable products including: cold drink cup, fruit container, salad plate, fruit plate, egg tray, electronics tray, IC card, cup lid or cake lid and etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.20 - 1.30 | g/cm³ | Internal method |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 - 10 | g/10 min | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 50.0 | MPa | Internal method |
| Tensile Strain (Break) | > 3.0 | % | Internal method |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 3.0 - 5.0 | kJ/m² | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 56.0 - 60.0 | °C | Internal method |
| Melting Temperature | 140 - 155 | °C | Internal method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Hopper Temperature | 20.0 - 40.0 | °C | |
| Cylinder Zone 1 Temp. | 180 - 200 | °C | |
| Cylinder Zone 2 Temp. | 180 - 200 | °C | |
| Cylinder Zone 3 Temp. | 180 - 200 | °C | |
| Cylinder Zone 4 Temp. | 180 - 200 | °C | |
| Cylinder Zone 5 Temp. | 180 - 190 | °C | |
| Die Temperature | 180 - 190 | °C | |
| Take-Off Roll | 25.0 - 45.0 | °C |
| Extrusion instructions |
|---|
| Air Dew Point: -40°C to 42°CAir Flow Rate: >1.85 m³/hr-kg resinFeed Throat: 20 to 40°CMaximum Regrind: 35%L/D Ratio: 24:1 to 32:1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (PMMA) M/06 | A. Schulman Europe | Acrylic (PMMA) | POLYMAN® |
| Fainplast PVC RKI 01298/W-UV | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Hanwha Total PP HJ492 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| Huafon JF-A-WV1008B | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| Sumiliteresin® PR-1070 I | SBHPP | Phenolic | Sumiliteresin® |
