Order Products : sales@su-jiao.com
UBE Nylon 7115U
| Category: | Nylon 612 , Polyamide 612 |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4kGLP3_UBE-Nylon-7115U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UBE Nylon 7115U is a polyamide 612 (nylon 6/12) material,. This product is available in North America,. The main characteristics of UBE Nylon 7115U are: Copolymer. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/1.0 kg) | 60 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 20.0 | MPa | ASTM D638 |
| Fracture, 23°C | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 300 | % | ASTM D638 |
| Flexural Modulus (23°C) | 520 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 23.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 60.0 | °C | ASTM D648 |
| Melting Temperature | 145 | °C |
| Additional Information |
|---|
| The value listed as Melting Point was tested in accordance with ASTM D3418.Tensile Strength at Break, ASTM D638, 23°C: >27 MPaTensile Elongation at Break, ASTM D638, 23°C: >300% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unichem 9011AG-015 | Colorite Polymers | PVC, Unspecified | Unichem |
| Boltaron 1050 | Boltaron Performance Products | PVC, Unspecified | Boltaron |
| LNP™ THERMOCOMP™ ZX08005 compound | SABIC Innovative Plastics Europe | PPE+PS | LNP™ THERMOCOMP™ |
| LUVOCOM® 1105-7041 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| Lifoflex® UV FLAM 40600 | Müller Kunststoffe GmbH | TPE | Lifoflex® |
