Telcar® TL-3089A XRD (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Telcar TL-3089A XRD is a general purpose thermoplastic elastomer designed for the consumer/industrial market. Telcar TL-3089A XRD is a medium density, medium hardness grade, suitable for both injection molding and extrusion.

General Information
Features	Low liquidity Lubrication Fill Medium density Medium hardness
Uses	Washer Washer Seals General
RoHS Compliance	RoHS compliance
Appearance	Opacity Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.998	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	4.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shaw A, 1 sec	70	ASTM D2240
Shaw A, 5 seconds	68	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	2.97	MPa	ASTM D412
Flow : 100% strain	5.05	MPa	ASTM D412
Transverse flow : 300% strain	4.27	MPa	ASTM D412
Flow : 300% strain	8.39	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	14.7	MPa	ASTM D412
Flow : Fracture	13.7	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	850	%	ASTM D412
Flow : Fracture	520	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	50.1	kN/m	ASTM D624
Flow	45.0	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	14	%	ASTM D395B
70°C, 22 hr	87	%	ASTM D395B

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	216 - 238	°C
Middle Temperature	216 - 238	°C
Front Temperature	216 - 238	°C
Nozzle Temperature	216 - 238	°C
Processing (Melt) Temp	216 - 238	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	204 - 227	°C
Cylinder Zone 2 Temp.	204 - 227	°C
Cylinder Zone 3 Temp.	204 - 227	°C
Cylinder Zone 4 Temp.	204 - 227	°C
Cylinder Zone 5 Temp.	204 - 227	°C
Die Temperature	204 - 227	°C

Extrusion instructions
Screw Speed: 30 to 100 rpm.Screen Pack Recommendation:60/200/200/60 to 60/200/400/400/200/60 mesh size.

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Telcar®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4kGBPb_TelcarTL3089AXRDPRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Thermovin™ HHD220	Vi-Chem Corporation	PVC, Rigid	Thermovin™
XENOY™ 1760 resin	SABIC Innovative Plastics Asia Pacific	PC+PBT	XENOY™
Xuchuan A-9190/B-8290	Xuchuan Chemical (Suzhou) Co., Ltd	TPU-Polyester	Xuchuan
Comai 663-2 BA	Comai Ltda	LLDPE	Comai
Jam PE 20X02	Jam Petrochemical Company	LLDPE	Jam PE