Order Products : sales@su-jiao.com

Prime Micro X

Category:	SMA , Styrene Maleic Anhydride
Manufacturer:	Primex Plastics Corporation
Trademark:	Prime Micro
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4iaO8v_Prime-Micro-X.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Is a tougher improved Styrene Maleic-anhydride copolymer resin for microwave packaging requiring "freezer to microwave" and ESCR performance. The reheated stiffness is better than PP and it can be exposed from - 40 to 250°F. Prime Micro-X is compatible with existing lid sealing films and is FDA approved. Applications: Food packaging for freezer to microwave. Prime Micro-X was compared to PP and filled PP for food packaging from 150 to >250°F filled with pancakes, muffins, pizza, sausage, chicken patties and bacon. The three materials passed the test with the exception of bacon and PP and filled PP ruptured, where the Micro-X had only a dimensional change. Processing: Prime Micro-X thermoforms similarly to Polystyrene. The same forming tools can be used for both materials. Finishing: Prime Micro-X can be trimmed with steel rule or hard trim dies. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Colors are typically white, black and pastels but custom color matching is available by request. Textures include smooth and matte. Prime Micro-X comes in a wide variety of size and gauges. Please contact your local Primex Plastics representative for details.

Message

Is a tougher improved Styrene Maleic-anhydride copolymer resin for microwave packaging requiring "freezer to microwave" and ESCR performance. The reheated stiffness is better than PP and it can be exposed from - 40 to 250°F. Prime Micro-X is compatible with existing lid sealing films and is FDA approved.

Applications:
Food packaging for freezer to microwave. Prime Micro-X was compared to PP and filled PP for food packaging from 150 to >250°F filled with pancakes, muffins, pizza, sausage, chicken patties and bacon. The three materials passed the test with the exception of bacon and PP and filled PP ruptured, where the Micro-X had only a dimensional change.

Processing:
Prime Micro-X thermoforms similarly to Polystyrene. The same forming tools can be used for both materials.

Finishing:
Prime Micro-X can be trimmed with steel rule or hard trim dies.

Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process.

Colors, Textures and Capabilities:
Colors are typically white, black and pastels but custom color matching is available by request. Textures include smooth and matte. Prime Micro-X comes in a wide variety of size and gauges. Please contact your local Primex Plastics representative for details.

General Information
Features	Copolymer Good Impact Resistance Good Stiffness High ESCR (Stress Crack Resist.) High Heat Resistance High Tensile Strength Low Temperature Impact Resistance
Uses	Food Packaging
Agency Ratings	FDA Unspecified Rating
Appearance	Black Colors Available White
Forms	Sheet
Processing Method	Thermoforming

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.06	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)	0.60	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.40 to 0.70	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	27.6	MPa	ASTM D638
Tensile Elongation (Break)	20	%	ASTM D638
Flexural Modulus	2140	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	270	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	107	°C	ASTM D648
Vicat Softening Temperature	123	°C	ASTM D1525

Additional Information	Nominal Value	Unit
Temperature Range	-40 to 121	°C

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom PP6000 S35	Spartech Polycom	PP, Unspecified	Spartech
NEFTEKHIM PS 825ES	Nizhnekamskneftekhim Inc.	PS (HIPS)	NEFTEKHIM PS
FRIANYL® A3 GF20 V0XI	Nilit Plastics	Nylon 66	FRIANYL®
RTP 799 X 143519 EG	RTP Company	HDPE	RTP
Sylvin 8980-55 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin