Order Products : sales@su-jiao.com
Braskem PE ES6004
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4h1s9m_Braskem-PE-ES6004.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ES6004 is a high density polyethylene, homopolymer designed for the blow-molding segment. ES6004 shows high stiffness properties, good impact resistance and good surface quality. Application: Blow Molded Small Volume: Bottles for lubricant and edible oils, milk, juice and yogurt; Toys. Process: Blow Molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.35 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (2.00 mm, 100% Igepal, Compression Molded, F50) | 20.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 30.0 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Compression Molded) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded) | 70.0 | °C | ASTM D648 |
| Injection instructions |
|---|
| Recommended Blow Molding Conditions: Feeding Zone: 185°C Barrel: 190°C Die: 195°C Parison: 200°C Mold Temperature: 5°C to 25°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN AE8000 | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| Sindustris PC GP2103 | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Wondel® S SN0P | Nanjing Julong Engineering Plastics Co., LTD | ABS | Wondel® S |
| Estane® 2103-85AE TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Estane® |
| KOPLA PP KPQ1031 | KOPLA Co., Ltd. | PP, Unspecified | KOPLA PP |
