Order Products : sales@su-jiao.com
Complet® LCF40-PA6
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | PlastiComp, Inc. |
| Trademark: | Complet® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4dlKbZ_Complet-LCF40-PA6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Complet®LCF40-PA6 is a polyamide 6 (nylon 6) product, which contains a 40% long carbon fiber as a filler. It is available in North America, Europe or Asia Pacific. The main features are: Rohs certification. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 29600 | MPa | ASTM D638 |
| Tensile Strength | 290 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.0 | % | ASTM D638 |
| Flexural Modulus | 23400 | MPa | ASTM D790 |
| Flexural Strength | 427 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 270 | J/m | ASTM D256 |
| Unnotched Izod Impact | 1000 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 249 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.18 | % | |
| Suggested Max Regrind | 5 | % | |
| Rear Temperature | 260 - 277 | °C | |
| Middle Temperature | 266 - 282 | °C | |
| Front Temperature | 271 - 288 | °C | |
| Nozzle Temperature | 271 - 288 | °C | |
| Processing (Melt) Temp | 271 - 288 | °C | |
| Mold Temperature | 93.3 | °C | |
| Back Pressure | 0.172 - 0.345 | MPa | |
| Screw Speed | 30 - 50 | rpm | |
| Cushion | 6.35 | mm | |
| Screw L/D Ratio | 18.0:1.0 to 20.0:1.0 | ||
| Screw Compression Ratio | 2.0 : 1.0 - 3.0 : 1.0 |
| Injection instructions |
|---|
| Injection speed: 2 to 3 in/secInjection pressure: medium to maximum |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR PP 307 | PolyOne Corporation | PP, Unspecified | Maxxam™ FR |
| Colorite 66 Series 5566 | Colorite Polymers | PVC, Unspecified | Colorite 66 Series |
| Desmopan® DP 9392AU | Covestro - PUR | TPU-Polyether | Desmopan® |
| EPDM 763P | The Dow Chemical Company | EPDM | EPDM |
| EPITEC® PC-910FH | Osterman & Company | PC | EPITEC® |
