Order Products : sales@su-jiao.com
WPP PP JOS B26530-Black
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4WFg9b_WPP-PP-JOS-B26530-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Properties shown below for a medium impact polypropylene copolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.908 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 29.0 | MPa | ASTM D638 |
| Flexural Modulus 2 | 1100 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Multi-Axial Instrumented Impact Energy (-30°C) | 39.0 | J | GM 9300P |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 99.0 | °C | ASTM D648 |
| Additional Information |
|---|
| Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™-C EF750 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| UBE Nylon 1015 GNKF | UBE Engineering Plastics, S.A. | Nylon 6 | UBE Nylon |
| ALTECH® PA66 A 2020/109 GF20 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Aropol™ Q 67700 resins | Ashland Performance Materials | Polyester, TS | Aropol™ |
| LEXAN™ EXL1494T resin | SABIC Innovative Plastics | PC | LEXAN™ |
