Order Products : sales@su-jiao.com
VENYL SW550
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | AD majoris |
| Trademark: | VENYL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4W9ysu_VENYL-SW550.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VENYL SW550 is a greyish black, mineral filled magnetized polyamide 6 compound intended for injection moulding. The product is only available in naturally greyish black. APPLICATIONS VENYL SW550 has been developed for magnetic applications provide adherence to magnetized steel and can be used for magnetic signal systems. Low shrinkage & warpage. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.85 | g/cm³ | ISO 1183 |
| Molding Shrinkage (2.00 mm) | 0.52 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 6330 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 55.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.2 | % | ISO 527-2 |
| Flexural Modulus | 7030 | MPa | ISO 178 |
| Flexural Stress | 106 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.5 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength | 26 | kJ/m² | ISO 179 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 265 to 280 | °C | |
| Middle Temperature | 255 to 270 | °C | |
| Front Temperature | 255 to 270 | °C | |
| Nozzle Temperature | 240 to 275 | °C | |
| Mold Temperature | 60.0 to 100 | °C | |
| Injection Pressure | 60.0 to 90.0 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 50.0 to 70.0 | MPa | |
| Screw L/D Ratio | 15.0:1.0 to 20.0:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BIOPLAST® 200 | BIOTEC GmbH & Co. KG | TP, Unspecified | BIOPLAST® |
| Braskem PE ML2400N | Braskem | LLDPE | Braskem PE |
| Generic PE, Unspecified | Generic | PE, Unspecified | Generic |
| HiFill® PA6 GF14 HS L BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| KumhoSunny ASA XC230G | Shanghai KumhoSunny Plastics Co., Ltd. | ASA | KumhoSunny ASA |
