Order Products : sales@su-jiao.com
Riblene® MR 10
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Riblene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4Usdss_Riblene-MR-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Riblene® MR 10 is a high fluidity low density polyethylene resin (LDPE). Parts made by Riblene® MR 10 are characterised by a high flexibility. Riblene® MR 10 is suitable for injection moulding and compound applications. Riblene® MR 10 is recommended for large complex mouldings, artificial flowers and low thickness articles. Because of its fluidity, the resin can be used as base for masterbatches. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 45 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 10.0 | MPa | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 120 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -20.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 84.0 | °C | ISO 306/A |
| Melting Temperature | 107 | °C | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 to 200 | °C | |
| Middle Temperature | 160 to 200 | °C | |
| Front Temperature | 160 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 201D GB 20 | RTP Company | Nylon 612 | RTP |
| Vinnolit® E 75 SK | Vinnolit GmbH & Co. KG | PVC Homopolymer | Vinnolit® |
| Cheng Yu E2325 | Cheng Yu Plastic Company Limited | PET | Cheng Yu |
| Geolast™ 701-80W183 | ExxonMobil Chemical | TPV | Geolast™ |
| Iupiace® GV10 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
