| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4U4hCO_Sinvicomp-SIG4002.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
Sinvicomp SIG4002 is a Flexible Polyvinyl Chloride material. It is available in Asia Pacific for extrusion. Primary attribute of Sinvicomp SIG4002: High Stiffness. Typical application of Sinvicomp SIG4002: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.52 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 91 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 20.0 | MPa | IEC 811-1-1 |
| Tensile Elongation 1(Break) | 270 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength (80°C, 168 hr) | 10 | % | IEC 811-1-2 |
| Change in Ultimate Elongation (80°C, 168 hr) | 15 | % | IEC 811-1-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Stability 2(190°C) | > 2 | hr | BS 2782 |
| Note Message | |
|---|---|
| 1 . | 250 mm/min |
| 2 . | Congo Red |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNOGRAN® IONOMERE NAT CLEAR | Eurocompound Polymers | Ionomer | TECHNOGRAN® |
| ASTALAC™ ASA 304 | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| AXELERON鈩?CS 7540 NT CPD | The Dow Chemical Company | LLDPE | AXELERON™ |
| KumhoSunny ASA XC220 | Shanghai KumhoSunny Plastics Co., Ltd. | ASA | KumhoSunny ASA |
| Iupiace® LN23 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |