Order Products : sales@su-jiao.com
LNP™ THERMOCOMP™ RFB66 compound
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ THERMOCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4T6aTc_LNP-THERMOCOMP-RFB66-compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP THERMOCOMP RFB66 is a compound based on Nylon 66 resin containing 30% Glass Fiber, 30% Glass Bead. Also known as: LNP* THERMOCOMP* Compound RF-100-12 MG Product reorder name: RFB66 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | ASTM D792 | ||
| -- | 1.70 | g/cm³ | |
| -- | 1.69 | g/cm³ | |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 24 hr | 0.40 to 0.70 | % | |
| Across Flow : 24 hr | 0.90 to 2.0 | % | |
| Water Absorption | |||
| 24 hr, 50% RH | 0.34 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 0.51 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 15000 | MPa | ASTM D638 |
| -- | 13400 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Yield 2 | 138 | MPa | ASTM D638 |
| Yield | 128 | MPa | ISO 527-2/5 |
| Break | 152 | MPa | ASTM D638 |
| Break 3 | 138 | MPa | ASTM D638 |
| Break | 122 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Yield 4 | 1.8 | % | ASTM D638 |
| Yield | 1.7 | % | ISO 527-2/5 |
| Break | 1.7 | % | ASTM D638, ISO 527-2/5 |
| Break 5 | 1.8 | % | ASTM D638 |
| Flexural Modulus | |||
| -- | 13800 | MPa | ASTM D790 |
| 50.0 mm Span 6 | 13000 | MPa | ASTM D790 |
| -- 7 | 12600 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 248 | MPa | ASTM D790 |
| -- | 209 | MPa | ISO 178 |
| Yield, 50.0 mm Span 8 | 222 | MPa | ASTM D790 |
| Break, 50.0 mm Span 9 | 221 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 64 | J/m | ASTM D256 |
| 23°C 10 | 6.7 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 530 | J/m | ASTM D4812 |
| 23°C 11 | 37 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Total Energy | 10.5 | J | ASTM D3763 |
| -- | 4.20 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 257 | °C | ASTM D648 |
| 0.45 MPa, Unannealed, 64.0 mm Span 12 | 249 | °C | ISO 75-2/Bf |
| 1.8 MPa, Unannealed, 3.20 mm | 244 | °C | ASTM D648 |
| 1.8 MPa, Unannealed, 64.0 mm Span 13 | 232 | °C | ISO 75-2/Af |
| CLTE | ASTM D696 | ||
| Flow : -30 to 30°C | 3.5E-5 | cm/cm/°C | |
| Transverse : -30 to 30°C | 5.1E-5 | cm/cm/°C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.15 to 0.25 | % | |
| Rear Temperature | 266 to 277 | °C | |
| Middle Temperature | 282 to 293 | °C | |
| Front Temperature | 293 to 304 | °C | |
| Processing (Melt) Temp | 282 to 304 | °C | |
| Mold Temperature | 93.3 to 110 | °C | |
| Back Pressure | 0.172 to 0.344 | MPa | |
| Screw Speed | 30 to 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | Type I, 5.0 mm/min |
| 3 . | Type I, 5.0 mm/min |
| 4 . | Type I, 5.0 mm/min |
| 5 . | Type I, 5.0 mm/min |
| 6 . | 1.3 mm/min |
| 7 . | 2.0 mm/min |
| 8 . | 1.3 mm/min |
| 9 . | 1.3 mm/min |
| 10 . | 80*10*4 |
| 11 . | 80*10*4 |
| 12 . | 80*10*4 mm |
| 13 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP EMI 881 | RTP Company | Acetal (POM) Copolymer | RTP |
| MIDILENA III PPF401 | ROMPETROL PETROCHEMICALS S.R.L. | PP Homopolymer | MIDILENA III |
| Small Boss STPR003 | Tongxiang Small Boss Special Plastic Products Co., Ltd. | SBS | Small Boss |
| VYPET VNT 630 FR | Lavergne Group | PET | VYPET |
| IROCOAT® CA-237 | Huntsman Corporation | TPU, Unspecified | IROCOAT® |
