Order Products : sales@su-jiao.com
Stanyl® TW200B6
| Category: | Nylon 46 , Polyamide 46 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Stanyl® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4Rq1m2_Stanyl-TW200B6.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Stanyl® TW200B6 is a Polyamide 46 (Nylon 46) material filled with 30% carbon fiber. It is available in Asia Pacific, Europe, or North America. Important attributes of Stanyl® TW200B6 are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.28 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow | 0.90 | -- | % | |
| Flow | 0.20 | -- | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 2.6 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | ISO 527-2 | |||
| -- | 24000 | -- | MPa | |
| 120°C | 10000 | -- | MPa | |
| 160°C | 8800 | -- | MPa | |
| 180°C | 8300 | -- | MPa | |
| Tensile Stress | ISO 527-2 | |||
| Break | 240 | 150 | MPa | |
| Break, 120°C | 125 | -- | MPa | |
| Break, 160°C | 105 | -- | MPa | |
| Break, 180°C | 95.0 | -- | MPa | |
| Tensile Strain | ISO 527-2 | |||
| Break | 2.0 | 4.0 | % | |
| Break, 120°C | 3.0 | -- | % | |
| Break, 160°C | 3.0 | -- | % | |
| Break, 180°C | 3.0 | -- | % | |
| Flexural Modulus | 18500 | 9200 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 6.5 | 6.5 | kJ/m² | |
| 23°C | 8.0 | 14 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 50 | 50 | kJ/m² | |
| 23°C | 60 | 75 | kJ/m² | |
| Notched Izod Impact Strength | ISO 180/1A | |||
| -40°C | 6.5 | 6.5 | kJ/m² | |
| 23°C | 8.0 | 14 | kJ/m² |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 290 | -- | °C | ISO 75-2/A |
| Melting Temperature | 295 | -- | °C | ISO 11357-3 |
| CLTE | ISO 11359-2 | |||
| Flow | 8.0E-6 | -- | cm/cm/°C | |
| Transverse | 3.4E-5 | -- | cm/cm/°C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+2 | -- | ohms·cm | IEC 60093 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Rear Temperature | 280 to 320 | °C | |
| Middle Temperature | 300 to 320 | °C | |
| Front Temperature | 300 to 320 | °C | |
| Nozzle Temperature | 300 to 320 | °C | |
| Processing (Melt) Temp | 305 to 320 | °C | |
| Mold Temperature | 80.0 to 120 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 2.00 to 10.0 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 5150-90 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| T & T Marketing TPE 5575R | T & T Marketing, Inc. | TPE | T & T Marketing |
| Nanjing Hongrui PBT T401 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PBT | Nanjing Hongrui PBT |
| Hanwha Total PE EP32 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | LLDPE | Hanwha Total PE |
| Bergamid™ A80 W20 H black UV SO | PolyOne Corporation | Nylon 66 | Bergamid™ |
