Order Products : sales@su-jiao.com
Generic PP Impact Copolymer - Calcium Carbonate
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4OMTXC_Generic-PP-Impact-Copolymer---Calcium-Carbonate.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PP Impact Copolymer - Calcium Carbonate This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 - 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 9.5 - 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 1.1 - 1.2 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 1790 - 2070 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 - 110 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 93.3 | °C | |
| Drying Time | 1.5 - 4.0 | hr | |
| Rear Temperature | 204 - 216 | °C | |
| Middle Temperature | 215 - 216 | °C | |
| Front Temperature | 215 - 227 | °C | |
| Mold Temperature | 18.3 - 60.0 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PP Impact Copolymer - Calcium CarbonateThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unichem 4260A-66 | Colorite Polymers | PVC, Flexible | Unichem |
| GLS Nylon 6 PN06 Halogen Free | GLS Polymers Pvt. Ltd. | Nylon 6 | GLS Nylon 6 |
| LUVOCOM® 1301-7896 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| Optix® CA-1000 I FDA | Plaskolite, Inc. | Acrylic (PMMA) | Optix® |
| Domamid HT™ 7750R35H3 | Technical Polymers, LLC | Nylon 66 | Domamid HT™ |
