| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | S&E Specialty Polymers, LLC |
| Trademark: | S&E PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4OHQzf_S-E-PVC-GA-1060.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| S & E PVC GA-1060 is a polyvinyl chloride product,. It is available in North America. Typical application areas are: wire and cable. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 95 | ASTM D2240 | |
| Shaw A, 15 seconds | 92 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 14.5 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 22.8 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 320 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -20.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (55°C) | 2.2E+13 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 28 | % | ASTM D2863 |
| Additional Information |
|---|
| Suggested Stock Temperature: 380°FTemperature Rating: 105°CMin. Wall Thickness: 0.008 inches |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MonoSol® F100 | MonoSol, LLC | CA | MonoSol® |
| EPT V Series™ PX-061 | Mitsui Chemicals, Inc. | EPDM | EPT V Series™ |
| Hifax CB 1173 G/M 2700 | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| LUVOCOM® 1-8181 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| DOW™ LDPE 505I | The Dow Chemical Company | LDPE | 陶氏低密度聚乙烯 |