Order Products : sales@su-jiao.com

VEGEMAT® E45122

Category:	Biodeg Polymers , Biodegradable Polymers
Manufacturer:	VEGEPLAST S.A.S.
Trademark:	VEGEMAT®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4O7ao8_VEGEMAT-E45122.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VEGEMAT® is a composite material concept obtained by transforming all the aerial parts of corn with neither separation nor purification of their constituent parts. Thanks to its technical and chemical properties, this new bioplastique material based on corn, 100% biodegradable, is intended to substitute itself from usual plastics of petrochimical origins, design for injection. Pieces mades from VEGEMAT® have the advantages of both wood and cardboard for their natural aspect, their biodegradability and the advantage of plastics for their ease of use. The thermoplastic VEGEMAT® ® granules are shaped by injection moulding with or without having to make any particular adjustment to tooling. VEGEMAT® existe is available in various grades that meet the technical requirements of industrialist. * VEGEMAT® E4589 for making solid items (of > 4-5 mm thick). * VEGEMAT® E45114 for slightly technical items (of between 2 and 4 mm thick). * VEGEMAT® E45122 for making technical items (of < 2mm thick) requiring a really fluid material.

Message

VEGEMAT® is a composite material concept obtained by transforming all the aerial parts of corn with neither separation nor purification of their constituent parts.

Thanks to its technical and chemical properties, this new bioplastique material based on corn, 100% biodegradable, is intended to substitute itself from usual plastics of petrochimical origins, design for injection.

Pieces mades from VEGEMAT® have the advantages of both wood and cardboard for their natural aspect, their biodegradability and the advantage of plastics for their ease of use.

The thermoplastic VEGEMAT® ® granules are shaped by injection moulding with or without having to make any particular adjustment to tooling.

VEGEMAT® existe is available in various grades that meet the technical requirements of industrialist.

* VEGEMAT® E4589 for making solid items (of > 4-5 mm thick).
* VEGEMAT® E45114 for slightly technical items (of between 2 and 4 mm thick).
* VEGEMAT® E45122 for making technical items (of < 2mm thick) requiring a really fluid material.

General Information
Features	Updatable resources Biodegradable
Forms	Particles
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.45	g/cm³	ISO 1183

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2000	MPa	ISO 527-2
Tensile Stress (Break)	16.0	MPa	ISO 527-2
Tensile Strain (Break)	0.79	%	ISO 527-2
Flexural Modulus	1300	MPa	ISO 178
Flexural Stress	20.0	MPa	ISO 178

Thermal	Nominal Value	Unit
Melting Temperature	120 - 145	°C

Additional Information	Nominal Value	Unit
Maximum Hygrometry ¹	80	%
Utilization Temperature	50 - 60	°C

Injection	Nominal Value	Unit
Rear Temperature	40.0 - 50.0	°C
Middle Temperature	60.0 - 80.0	°C
Front Temperature	100 - 130	°C
Nozzle Temperature	110 - 150	°C
Mold Temperature	20.0 - 60.0	°C
Injection Rate	Fast

Injection instructions
Holding duration: 2 to 5 secSolidifying duration: 10 to 20 sec

Note Message
1 .	without treating surface

Resin Grade	Manufacturer	Category	Trademark
Tecodur® PB70 GR23 BK EF	Eurotec Engineering Plastics	PBT	Tecodur®
Tectron H2399	TECTRON Systems Pte Ltd	TPV	Tectron
MORETEC™ 0218CM	Prime Polymer Co., Ltd.	LLDPE	MORETEC™
Sylvin 8240-98FU Brown 7425	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Sylvin 9067-90 Grey 991	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin