Order Products : sales@su-jiao.com
Diofan® P 530
| Category: | PVDC , Polyvinylidene Chloride |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Diofan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4LzHnm_Diofan-P-530.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Diofan® P 530 is a one-component, water-based dispersion of a polyvinylidene chloride (PVDC) copolymer. It is free of solvent traces, alkylphenol ethoxylates or any other toxic substances. This material was developed to adhere on metal and to remain flexible when exposed to a broad range of end-use temperatures over time. This makes it an ideal binder for one-component, air drying, waterborne formulated paints and coatings where long-lasting protection of the substrate is targeted. Diofan® P 530 also provides excellent chemical resistance and flame-retardant properties. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| pH | 1.7 | ||
| Surface tension- Foaming tendency | 40 | mN/m | |
| Film formation- Film forming temperature | 9 | °C | |
| Solids Content | 57 | % | |
| Density- Dispersion (wet) | 1.280 | g/cm³ | |
| Emulsion type | anion |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Shelf life- 23℃ (23°C) | 12 | month |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | 13.0 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| DELIVERY AND STORAGE Diofan® P 530 is delivered in bulk or in Intermediate Bulk Containers (IBC). Bulk supplied latex should be stored in reservoirs made of suitable stainless steel, HDPE, rigid PVC or glass fiber-reinforced polyester. Contact of anionic Diofan® dispersion with metals like iron, zinc, aluminum and copper as well as alloys such as brass and bronze must be avoided. Keep the vessels tightly closed to prevent drying through evaporation. Store the product ideally between 5°C and 25°C (41 °F and 77°F) to avoid degradation. FOOD AND DRUG LEGISLATIONS Some agency ratings are listed on page 1. Necessary certification will be provided upon request. ISO CERTIFICATION The implemented management system for the production, internal transfer and delivery, design and development of Diofan® vinylidene chloride copolymers (PVDC) produced in Tavaux has been assessed and found to meet the requirements of ISO 9001: 2008, ISO 14001: 2004 and OHSAS 18001: 2007. |
| Note Message | |
|---|---|
| 1 . | Dry Diofan®Glass transition temperature tested by P 530 latex |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Kuraray Poval® PVA 225 | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
| MAJORIS DW444X/8 | AD majoris | PP, Unspecified | MAJORIS |
| Mafill® CR XM 5146 | Ravago Group | PP, Unspecified | Mafill® |
| NORYL GTX™ LUX9612G resin | SABIC Innovative Plastics Europe | PC | NORYL GTX™ |
| INEOS EMAA M21N430B | INEOS Olefins & Polymers Europe | EMAA | INEOS EMAA |
