Order Products : sales@su-jiao.com
Vi-Chem PVC V143-60I-5841
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Vi-Chem PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4HG6XE_Vi-Chem-PVC-V143-60I-5841.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vi-Chem PVC V143-60I-5841 is a Flexible Polyvinyl Chloride material. It is available in North America for injection molding. |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 | g/cm³ | ASTM D792A, ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec, 2.00 mm, Compression Molded) | 58 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, 2.00 mm, Compression Molded 1 | > 9.20 | MPa | ASTM D638 |
| Yield, 2.00 mm, Compression Molded | > 9.20 | MPa | ISO 527-2/2/500 |
| Tensile Elongation (Break, 2.00 mm, Compression Molded) | > 550 | % | ASTM D638, ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | |||
| -- | 23.5 | kN/m | ASTM D624 |
| 2.00 mm | 24 | kN/m | ISO 34-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (85°C, 100 hr) | -1.3 | % | ASTM D573, ISO 188 |
| Change in Ultimate Elongation in Air (85°C, 100 hr) | 5.4 | % | ASTM D573, ISO 188 |
| Change in Mass in Air (85.0°C, 100 hr) | 1.0 | % | ASTM D573 |
| Change in Mass in Air (85.0°C, 100 hr) | 1.0 | % | ISO 188 |
| Thermal | Nominal Value | ||
|---|---|---|---|
| Cold Flexibility 2(-40°C) | No cracking |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flammability 3 | 85.0 | Multiple Standards |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Color Stability 4 | 4.00 to 5.00 | Multiple Standards | |
| Florida Weathering 5 | > 4.00 | ||
| Soiling 6 | Pass | ||
| Xenon Weatherometer 7 | > 4.00 |
| Note Message | |
|---|---|
| 1 . | Type II, 500 mm/min |
| 2 . | FLTM BN-2-1 |
| 3 . | FMVSS 302, (ISO 3795/SAE J369) |
| 4 . | ISO 188/ASTM D573, AATCC |
| 5 . | 12 months, 5° South, AATCC |
| 6 . | FLTM BN 112-01 |
| 7 . | SAE J1885, 600 kJ/m², AATCC |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren F320 (1st-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| TAROPRENE® 1 A40 M1N | Taro Plast S.p.A. | TPV | TAROPRENE® |
| Hoffman PVC V7-54 | Hoffman Plastic Compounds Inc. | PVC, Rigid | Hoffman PVC |
| TOTAL Polyethylene Lumicene® M 4040 (Pipe) | TOTAL Refining & Chemicals | mMDPE | TOTAL Polyethylene |
| PENTAMID B GV30 H LS black | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
