Order Products : sales@su-jiao.com
DJSilicone NE-250
| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4E2g95_DJSilicone-NE-250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This product could be put into basic processing after adding vulcanizator DCBP. And it may not need second vulcanization when technical conditions properly controlled. The formed product has the following properties: very good high and low temperature resistance, corona and arc resistance, and electric insulation. It is suitable for different kinds of electric wire and cable, jacket rubber tubes and parts for electrical insulator, heat-resistant seals, irregular shaped and foam strips. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 to 1.23 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A 1 | 50 to 54 | ||
| Shore A 2 | 48 to 52 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | ASTM D412 | ||
| -- 3 | < 14 | % | |
| -- 4 | < 12 | % | |
| Tensile Strength 5(Yield) | > 8.00 | MPa | ASTM D412 |
| Tensile Elongation | ASTM D412 | ||
| Break 6 | > 380 | % | |
| Break 7 | > 440 | % | |
| Tear Strength | > 20.0 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 3.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 20 | kV/mm | ASTM D149 |
| Note Message | |
|---|---|
| 1 . | For Tube |
| 2 . | For Line |
| 3 . | For Line |
| 4 . | For Tube |
| 5 . | For Line |
| 6 . | For Tube |
| 7 . | For Line |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech Polycom PP5110 | Spartech Polycom | PP Homopolymer | Spartech |
| Novamid® 2320A | DSM Engineering Plastics | Nylon 66/6 | Novamid® |
| Chemlon® 104-13 GH | Teknor Apex Company (Chem Polymer) | Nylon 66 | Chemlon® |
| Pharmalene® FL 20 PH | Versalis S.p.A. | LDPE | Pharmalene® |
| Sylvin 9915-95 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
