Order Products : sales@su-jiao.com
GLAMIDE® TY-502NZ
| Category: | Nylon 6 Elast , Polyamide 6 Elastomer |
| Manufacturer: | TOYOBO America, Inc. |
| Trademark: | GLAMIDE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 4E17gV_GLAMIDE-TY-502NZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GLAMIDE®TY-502NZ is a polyamide 6 elastomer (nylon 6 elastomer) product,. It is available in North America. The main characteristics are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.18 | -- | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 7.0 | -- | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | ASTM D955 | |||
| 1.00 mm | 0.20 - 0.40 | -- | % | ASTM D955 |
| 3.00 mm | 0.50 - 0.80 | -- | % | ASTM D955 |
| Water Absorption | ASTM D570 | |||
| 24 hr | 0.70 | -- | % | ASTM D570 |
| Equilibrium, 65% RH | 1.9 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | -- | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength | ASTM D638 | |||
| Yield, -40°C | 110 | 106 | MPa | ASTM D638 |
| Yield, 23°C | 90.0 | 85.0 | MPa | ASTM D638 |
| Yield, 80°C | 50.0 | 28.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 20 | 20 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | |||
| -40°C | 4500 | 4200 | MPa | ASTM D790 |
| 23°C | 3500 | 3400 | MPa | ASTM D790 |
| 80°C | 2500 | 1000 | MPa | ASTM D790 |
| Flexural Strength | ASTM D790 | |||
| Yield, -40°C | 160 | 155 | MPa | ASTM D790 |
| Yield, 23°C | 145 | 130 | MPa | ASTM D790 |
| Yield, 80°C | 80.0 | 45.0 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 100 | -- | MPa | ASTM D695 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | ASTM D256 | |||
| -40°C | 70 | 70 | J/m | ASTM D256 |
| 23°C | 120 | 60 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 170 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 100 | -- | °C | ASTM D648 |
| CLTE - Flow | 5.5E-5 | -- | cm/cm/°C | ASTM D696 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume Resistivity | 1.0E+15 | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (2.00 mm) | 23 | 22 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 4.00 | 4.00 | ASTM D150 | |
| Arc Resistance | 130 | 130 | sec | ASTM D495 |
| Comparative Tracking Index | 600 | 600 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | HB | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Comparative Tracking Index, IEC Method: >600 V |
| 调节后的 Comparative Tracking Index, IEC Method: >600 V |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 305 - 320 | °C | |
| Mold Temperature | 90.0 | °C | |
| Injection Pressure | 30.0 - 40.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR WC 0521-48 R1 RoHS | PolyOne Corporation | PP, Unspecified | Maxxam™ FR |
| NuSil MED-6755 | NuSil Technology | Silicone | NuSil |
| Axiall PVC 4891 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| EVERLON® TZ-30 | Ever Polymer Co., Ltd. | SEBS+SBS | EVERLON® |
| Keltan® 6675 | LANXESS Buna GmbH | EPDM | Keltan® |
