Monprene® CP-18178 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene CP-18178 is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-18178 is a high hardness grade that exhibits sunlight resistance and UV absorbing characteristics, suitable for injection molding.

General Information
Features	Low Specific Gravity Sunlight Resistant Without Fillers Low density smoothness Light stabilization High liquidity Lubrication High hardness UV absorption
Uses	Safety equipment Handle Kitchen utensils Sporting goods Stationery Consumer goods application field
Appearance	Natural color
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.888	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	17	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	80	ASTM D2240
Shore A, 5 seconds, injection molding	78	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
Transverse flow : 100% strain ¹	4.63	MPa	ASTM D412
Flow : 100% strain ²	6.36	MPa	ASTM D412
Transverse flow : 300% strain ³	5.87	MPa	ASTM D412
Flow : 300% strain ⁴	7.85	MPa	ASTM D412
Tensile Strength ⁵			ASTM D412
Transverse flow : Fracture	9.00	MPa	ASTM D412
Flow : Fracture	9.35	MPa	ASTM D412
Tensile Elongation ⁶			ASTM D412
Transverse flow : Fracture	580	%	ASTM D412
Flow : Fracture	470	%	ASTM D412
Tear Strength ⁷			ASTM D624
Transverse flow	51.0	kN/m	ASTM D624
Flow	55.5	kN/m	ASTM D624
Compression Set ⁸(23°C, 22 hr)	28	%	ASTM D395B

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	182 - 232	°C
Middle Temperature	188 - 238	°C
Front Temperature	193 - 243	°C
Nozzle Temperature	199 - 249	°C
Processing (Melt) Temp	199 - 249	°C
Mold Temperature	35.0 - 48.9	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	Mouth die C, 510mm/min
2 .	Mouth die C, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	C mold, 510mm/min
6 .	Mouth die C, 510mm/min
7 .	C mold, 510mm/min
8 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	4DFh4v_Monprene-CP-18178.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Maxxam™ FR WC 0587-21 BE1 RoHS	PolyOne Corporation	PP, Unspecified	Maxxam™ FR
Matrixx 55N5006	The Matrixx Group, Inc.	PC	Matrixx
Hanwha Total PP BI830	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, High Crystal	Hanwha Total PP
Kaneka MUH K-7	Kaneka Corporation	ABS	Kaneka MUH
LNP™ STAT-KON™ AX02747 compound	SABIC Innovative Plastics	ABS	LNP™ STAT-KON™