Order Products : sales@su-jiao.com
LUBEMID A26 GF30 NATURAL
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | LUBEN PLAST srl |
| Trademark: | LUBEMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 46VIB7_LUBEMID-A26-GF30-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Compound based on PA66 natural first choice. With glass fibres 30%. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.33 to 1.37 | g/cm³ | ISO 1183/A |
| Water Absorption (23°C, 24 hr, 3.20 mm) | 1.1 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7500 to 8000 | MPa | ISO 527-2/1A/1 |
| Tensile Stress | ISO 527-2/1A/5 | ||
| Yield | 125 to 135 | MPa | |
| Break | 125 to 135 | MPa | |
| Tensile Strain | ISO 527-2/1A/5 | ||
| Yield | 2.0 to 3.0 | % | |
| Break | 2.0 to 3.0 | % | |
| Flexural Modulus 1 | 7000 to 7500 | MPa | ISO 178 |
| Flexural Stress 2 | 170 to 180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 to 9.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 50 to 60 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | |||
| 23°C, 3.20 mm | 90 to 100 | J/m | ASTM D256A |
| 23°C 3 | 60 to 70 | kJ/m² | ASTM D256 |
| 23°C | 7.0 to 9.0 | kJ/m² | ISO 180/A |
| 23°C 4 | 9.0 to 10 | kJ/m² | ASTM D256 |
| Unnotched Izod Impact Strength (23°C) | 55 to 65 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed, 3.20 mm | 245 to 255 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 245 to 255 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed, 3.20 mm | 235 to 245 | °C | ASTM D648 |
| Vicat Softening Temperature | |||
| -- | 245 to 255 | °C | ISO 306/A120 |
| -- | 235 to 245 | °C | ISO 306/B120 |
| Melting Temperature | 250 to 265 | °C | Internal Method |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index (2.00 mm) | 650 | °C | IEC 60695-2-12 |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | Notch E |
| 4 . | Notch A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mar-Bal MB2000-8 | Mar-Bal, Inc. | Polyester, TP | Mar-Bal |
| SMOKEGUARD™ V 1118 NATURAL | AlphaGary | PVC, Unspecified | SMOKEGUARD™ V |
| Aquamix™ 142 | PolyOne Corporation | Latex | Aquamix™ |
| DENILEN M 3539 | Vamp Tech | PP, Unspecified | DENILEN |
| ELASTOSIL® R 420/30 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
