Order Products : sales@su-jiao.com
Westlake LDPE EC4041AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 46SnrM_Westlake-LDPE-EC4041AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE low-density polyethylene EC4041 is recommended for use in the boardstock coating industry. The resin has low neck-in and good drawdown characteristics. Coatings produced from EC4041 have excellent heat-sealing characteristics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.6 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break, 23°C) | 13.1 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 23°C) | 180 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3(23°C) | 255 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toyolac® 100 X01 | Toray Plastics (Malaysia) Sdn. Bhd. | ABS | Toyolac® |
| DENYL A | Vamp Tech | ABS+Nylon | DENYL |
| Epoxies, Ect. 10-3216 TR | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| ALTECH® SAN B 2335/720 GF30 GB5 UV | ALBIS PLASTIC GmbH | SAN | ALTECH® SAN |
| WELLAMID Nylon 6000 GV 40 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
