Order Products : sales@su-jiao.com
POLYCOMPO PE 401
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3znR9p_POLYCOMPO-PE-401.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYCOMPO PE 401 is a Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific. Typical application: Caps/Lids/Closures. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 1.6 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 53 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 28.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 130 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 180 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -76.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 94.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 109 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIREX® 3022L1(I2) | Samyang Corporation | PC | TRIREX® |
| Zytel® 70G13HS1L NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| Niplene T20 | Soredi S.p.a. | PP Homopolymer | Niplene |
| Grilamid® XE 4180 nat | EMS-GRIVORY | Nylon 1010 | Grilamid® |
| Lushan EV1050G1 | Guangzhou Lushan New Materials Co., Ltd | EVA | Lushan |
