Order Products : sales@su-jiao.com

3M™ Dyneon™ TFM™ Modified PTFE TFM 1610

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ TFM™ Modified PTFE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3zWs4T_3M-Dyneon-TFM-Modified-PTFE-TFM-1610.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Free-flow PTFE of the 2nd generation for compression moulding

Features

Suspension polymerisate

High-flow powder guarantees easy feeding and good mould fill behaviour.

Low stretch-void-index

High surface quality, low content of pores and low permeation

Reduced deformation under load (cold flow)

Very good electrical properties

Good weldability

Typical applications

Especially suitable for automatic moulding

Static seals in industrial and mechanical engineering

Pumps

Sealing elements for fittings

Good elasticity enables special processing technologies like deep-drawing and blow-moulding

General Information
Features	Good Electrical Properties Good Surface Finish High Flow Weldable
Uses	Pump Parts Seals
Forms	Powder
Processing Method	Blow Molding Compression Molding Sintering

Physical	Nominal Value	Unit	Test Method
Density	2.16	g/cm³	ISO 12086
Apparent Density	0.76	g/cm³	ISO 60
Molding Shrinkage	3.5	%	Internal Method
Average Particle Size	430	µm	ISO 13320

Additional Information	Nominal Value	Unit
Compression Molding Molding Pressure	30.0	MPa
Compression Molding Temperature	23 to 26	°C
Sintering Temperature	375 to 380	°C

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	59		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	650	MPa	ISO 527-2
Deformation Under Load			ASTM D621
15 MPa ¹	4.00	%
15 MPa ²	10.0	%
15 MPa ³	8.00	%

Films	Nominal Value	Unit	Test Method
Tensile Strength (200 µm)	35.0	MPa	ISO 527-3
Tensile Elongation (Break, 200 µm)	600	%	ISO 527-3

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow			DIN 53752
30 to 100°C	1.2E-4	cm/cm/°C
30 to 200°C	1.4E-4	cm/cm/°C
30 to 260°C	1.7E-4	cm/cm/°C
Thermal Conductivity	0.22	W/m/K	DIN 52612

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+17	ohms	IEC 60093
Volume Resistivity	1.0E+18	ohms·cm	IEC 60093
Electric Strength (0.200 mm)	82	kV/mm	ISO 12086

Flammability	Nominal Value	Unit	Test Method
Flame Rating	V-0		UL 94

Note Message
1 .	permanent
2 .	100 hr
3 .	24 hr

Resin Grade	Manufacturer	Category	Trademark
TEKNIFLEX® VPOA7300	Tekni-Films, a div of Tekni-Plex	Film, PVC/PE/EVOH/PE/PCTFE	TEKNIFLEX®
CP PRYME庐 Nylon 6 N133L	Chase Plastics Services Inc.	Nylon 6	CP PRYME® Nylon 6
HiPrene® MT42IN	GS Caltex	PP, Unspecified	HiPrene®
IROGRAN® A 87 H 4615	Huntsman Corporation	TPU-Polyester	IROGRAN®
POLYFLON™ D-46	DAIKIN AMERICA, INC.	PTFE	POLYFLON™