Order Products : sales@su-jiao.com
CONAPOXY® FR-1080
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONAPOXY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3z0O5X_CONAPOXY-FR-1080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CONAPOXY FR-1080 is a two-part high temperature epoxy potting system designed to meet Class H (180°C) operating requirements. |
| General Information | |
|---|---|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.03 | g/cm³ | |
| -- 2 | 1.23 | g/cm³ | |
| Shrinkage | 1.4 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 90 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 56.5 | MPa | |
| Tensile Elongation (Break) | 2.0 | % |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tear Strength | 43.8 | kN/m |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Surface Resistivity | 5.5E+16 | ohms | |
| Volume Resistivity (25°C) | 9.7E+16 | ohms·cm | |
| Dielectric Strength | 24 | kV/mm | |
| Dielectric Constant (25°C, 1 kHz) | 3.12 | ||
| Dissipation Factor (25°C, 1 kHz) | 4.0E-3 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 83 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 2500 | cP |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Hardener |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RapidVac™ VA-1510 | Innovative Polymers, Inc. | TSU | RapidVac™ |
| Milastomer™ S-808BS | Mitsui Chemicals America, Inc. | TPV | Milastomer™ |
| TEREZ PA 6 7500 GF30 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| NORYL™ EN95 resin | SABIC Innovative Plastics Asia Pacific | PPE+PS | NORYL™ |
| ULTEM™ 1000P resin | SABIC Innovative Plastics | PEI | ULTEM™ |
