Order Products : sales@su-jiao.com
INEOS PP H05A-00
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3xaDCs_INEOS-PP-H05A-00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Grade H05A-00 is an antistatic polypropylene homopolymer with crack resistance and low static charge used in injection molding and extrusion applications. Typical applications are consumer products, housewares, medical packaging, and rigid packaging. This grade has been recognized by UL for sustained use at 65 ° C and meets the requirements of the U.S. Food and Drug Administration specified in 21 CFR 177.1520 and is Drug Master File listed. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.911 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.1 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 103 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 36.9 | MPa | |
| Break | 18.0 | MPa | |
| Tensile Elongation 2 | ASTM D638 | ||
| Yield | 9.2 | % | |
| Break | 140 | % | |
| Flexural Modulus - 1% Secant | 1720 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 41 | J/m | ASTM D256 |
| Notched Izod Impact (Area) (23°C) | 4.00 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 104 | °C | ASTM D648 |
| RTI Elec (3.00 mm) | 65.0 | °C | UL 746 |
| RTI Imp (3.00 mm) | 65.0 | °C | UL 746 |
| RTI Str (3.00 mm) | 65.0 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.00 mm) | HB | UL 94 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°) | 93 | ASTM D2457 | |
| Haze 3(1270 µm) | 73 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 23°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRILAC AG15E0 | Formosa Plastics Corporation | ABS | TAIRILAC |
| ALCOM® TPU 810/4073 AR10 | ALBIS PLASTIC GmbH | TPU, Unspecified | ALCOM® TPU |
| Luran® 2580 | Styrolution | SAN | Luran® |
| OP - PPO PPOX-10GF | Oxford Polymers | PPE+PS | OP - PPO |
| Sylvin 2996-67LG Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
