Order Products : sales@su-jiao.com
Telcar® GS5035
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Telcar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3wfBYb_Telcar-GS5035.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Telcar®GS5035 is a thermoplastic elastomer (TPE) material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 1.00 | MPa | ASTM D412 |
| 300% strain | 2.00 | MPa | ASTM D412 |
| Tensile Strength (Break) | 3.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 450 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 80.0 | °C | |
| Rear Temperature | 180 - 250 | °C | |
| Middle Temperature | 180 - 250 | °C | |
| Front Temperature | 180 - 250 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Pressure | 10.3 - 138 | MPa | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Purging Material: HDPE, PP |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 80.0 | °C | |
| Cylinder Zone 1 Temp. | 170 - 230 | °C | |
| Cylinder Zone 2 Temp. | 170 - 230 | °C | |
| Cylinder Zone 3 Temp. | 170 - 230 | °C | |
| Cylinder Zone 4 Temp. | 170 - 230 | °C | |
| Cylinder Zone 5 Temp. | 170 - 230 | °C |
| Extrusion instructions |
|---|
| Compression Ratio: 2.5 to 5.0Purging Material: HDPE, PPLD Ratio: 25:1 or higher |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Comai 408-2 NT | Comai Ltda | PP Copolymer | Comai |
| POLYCOMPO PP F122G | POLYCOMPO Co.,Ltd. | PP, Unspecified | POLYCOMPO PP |
| Sylvin 7011EE-90 BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Adflex Q 108 F | LyondellBasell Industries | TPO (POE) | Adflex |
| OTECH TPE OTO7510 - Profile | OTECH Corporation | TPE | OTECH TPE |
