Order Products : sales@su-jiao.com
APICAL 300AV
| Category: | PI, TS , Thermoset Polyimide |
| Manufacturer: | Kaneka Corporation |
| Trademark: | APICAL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3tEIHG_APICAL-300AV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
APICAL 300AV is a Thermoset Polyimide material. It is available in North America. Important attributes of APICAL 300AV are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.42 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 4.0E-3 | % | ASTM D955 |
| Water Absorption (24 hr) | 2.9 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (vs. Itself - Static) | 0.50 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 76 | µm | |
| Secant Modulus - 1% Secant, MD | 3170 | MPa | ASTM D882 |
| Tensile Strength - MD (Break) | 241 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 95 | % | ASTM D882 |
| Elmendorf Tear Strength - MD | 24 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Heat | 1100 | J/kg/°C | ASTM C351 |
| RTI Elec (0.0750 mm) | 240 | °C | UL 746 |
| RTI Str (0.750 mm) | 200 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 8.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | 180 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 3.40 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 1.4E-3 | ASTM D150 | |
| Hot-wire Ignition (HWI) (0.0750 mm) | 120 | sec | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.0750 mm) | V-0 | UL 94 | |
| Oxygen Index | 38 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA/ABS Blend 3610/4 GK 10 | TER HELL PLASTIC GMBH | ABS+Nylon | TEREZ PA/ABS |
| Ultramid® N-265 NF3001 | BASF Corporation | Nylon 66 | Ultramid® |
| Nylene® 2407 HSSP | Custom Resins Group | Nylon 6 | Nylene® |
| KumhoSunny ABS HFA705 | Shanghai KumhoSunny Plastics Co., Ltd. | ABS | KumhoSunny ABS |
| Petrothene® GA672962 | LyondellBasell Industries | HDPE | Petrothene® |
