Order Products : sales@su-jiao.com
Flexathene® PD907
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Flexathene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3qMf5U_Flexathene-PD907.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXATHENE PD 907 is a thermoplastic olefin (TPO) formulated for extrusion and thermoforming applications. PD 907 has an excellent balance of cold temperature impact resistance and stiffness. PD 907 is specially formulated for high melt strength, excellent dimensional stability and for use with paint film lamination. This product is readily reprocessed with minimal changes to processing characteristics or physical properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | |||
| -- | 0.967 | g/cm³ | ISO 1183/A |
| -- | 0.976 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | |||
| 230°C/2.16 kg | 2.1 | g/10 min | ASTM D1238 |
| 230°C/2.16 kg 1 | 2.1 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.89 to 1.2 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - Secant | 1320 | MPa | ISO 527-2 |
| Tensile Strength | |||
| Yield | 17.2 | MPa | ASTM D638 |
| Yield | 17.0 | MPa | ISO 527-2 |
| Tensile Elongation (Yield) | 14 | % | ASTM D638 |
| Flexural Modulus | |||
| Tangent 2 | 896 | MPa | ASTM D790B |
| Secant | 956 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | 430 | J/m | |
| -18°C | No Break | ||
| Unnotched Izod Impact (-30°C) | No Break | ASTM D4812 | |
| Instrumented Dart Impact 3 | ASTM D3763 | ||
| -30°C, Energy to Peak Load, Ductile Failure | 25.0 | J | |
| 23°C, Energy to Peak Load, Ductile Failure | 18.0 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 6.8E-5 | cm/cm/°C | ASTM E831 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 188 to 227 | °C |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 1.3 mm/min |
| 3 . | 2.20 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TechnoPet 3225 | TechnoCompound GmbH | PET | TechnoPet |
| NuSil CF20-2186 | NuSil Technology | Silicone | NuSil |
| CALIBRE™ IM 401-11 | Trinseo | PC | CALIBRE™ |
| KumhoSunny SMA HSG5415 | Shanghai KumhoSunny Plastics Co., Ltd. | SMA | KumhoSunny SMA |
| Deltron 4340 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PPS | Deltron |
