Order Products : sales@su-jiao.com
ResinDirect HDPE20
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | ResinDirect |
| Trademark: | ResinDirect |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3oZmnz_ResinDirect-HDPE20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ResinDirect HDPE20 is a High Density Polyethylene material. It is available in North America for injection molding. Primary attribute of ResinDirect HDPE20: Copolymer. Typical application of ResinDirect HDPE20: Food Contact Applications |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 26.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 500 | % | ASTM D638 |
| Flexural Modulus 3 | 903 | MPa | ASTM D790 |
| Note Message | |
|---|---|
| 1 . | 5.1 mm/min |
| 2 . | 5.1 mm/min |
| 3 . | 2.5 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LHI232H | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| 3SP™ White | EnvisionTEC, Inc. | Unspecified | 3SP™ |
| Celanex® 2404 MT | Celanese Corporation | PBT | Celanex® |
| Hylon® N1040MHL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Optix® CA-927 FDA | Plaskolite, Inc. | Acrylic (PMMA) | Optix® |
