Order Products : sales@su-jiao.com
apigo® 8376 BS/70
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | API SpA |
| Trademark: | apigo® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3ggivh_apigo-8376-BS-70.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
apigo®8376 BS/70 is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by extrusion or injection molding and is available in Europe. apigo®The application fields of 8376 BS/70 include consumer goods, electrical appliances, home applications, construction applications and automobile industries. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 6.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| -- | 7.30 | MPa | ASTM D638 |
| 100% strain | 2.20 | MPa | ASTM D638 |
| 300% strain | 2.90 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 870 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 31.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 - 170 | °C | |
| Middle Temperature | 160 - 180 | °C | |
| Front Temperature | 170 - 190 | °C | |
| Nozzle Temperature | 180 - 200 | °C | |
| Mold Temperature | 20.0 - 60.0 | °C | |
| Injection Rate | Slow-Moderate |
| Injection instructions |
|---|
| Injection Pressure: HighBack Pressure: MediumLocking Pressure: High |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 180 | °C | |
| Cylinder Zone 2 Temp. | 160 - 190 | °C | |
| Cylinder Zone 3 Temp. | 170 - 190 | °C | |
| Cylinder Zone 4 Temp. | 180 - 190 | °C |
| Extrusion instructions |
|---|
| L/D Ratio: >20:1Compression Ratio: 1:2.5 to 1:3 |
| Note Message | |
|---|---|
| 1 . | Without Notch |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 141 HI Z | RTP Company | PP, Unspecified | RTP |
| RAMLLOY PI300G6 | Polyram Ram-On Industries | PVDF | RAMLLOY |
| Niche PPCG40BK | Niche Polymer, LLC | PP Copolymer | Niche |
| Alathon® M5562 | LyondellBasell Industries | HDPE Copolymer | Alathon® |
| LNP™ STAT-KON™ DX95523C compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
