Order Products : sales@su-jiao.com
Glastic® 2165
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3eWbSo_Glastic-2165.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glastic 2165 is a standoff insulator that is molded of UL recognized flame resistant fiberglass-reinforced thermoset polyester molding compound. Glastic 2165 features shatter resistance and closer height tolerances than commonly available in porcelain insulators. Moisture and heat resistance properties of Glastic 2165 are higher than those of conventional plastic insulators. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Forms |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 6.89 | MPa | ASTM D638 |
| Compressive Strength | 55.2 | MPa | ASTM D695 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Arc Resistance | 180 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Cantilever Strength: 400 in/lbsTorque Strength: 12 ft/lbsHeight Tolerance: .015Creep Resistance: 1 inchTrack Resistance: 600 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SEN-6075PM60 | SHIN-A T&C | Epoxy | SHIN-A |
| WELLAMID Nylon 6000 GV 35 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 6 | WELLAMID Nylon |
| XIRAN® IZ0325M | Polyscope Polymers BV | SMA | XIRAN® |
| Monprene® CP-18250 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
| OTECH PVC OW633 - Wire Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
