Order Products : sales@su-jiao.com

Nylene® NX3024

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3eNPh1_Nylene-NX3024.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications

Excellent melt stability and good melt strength

Excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors

Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact

Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die

General Information
Features	Food Contact Acceptable Good Abrasion Resistance Good Melt Strength Good Toughness Grease Resistant High Melt Stability Low Odor Transfer Medium Viscosity
Uses	Coating Applications Compounding Film Non-specific Food Applications
Agency Ratings	FDA 21 CFR 177.1500
Forms	Pellets
Processing Method	Coating Coextruded Film Compounding Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.14	g/cm³	ASTM D792
Water Absorption (Saturation)	1.8	%	ASTM D570
Mold Shrinkage	1.4	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, 23°C)	82.7	MPa	ASTM D638
Tensile Elongation (Yield, 23°C)	70	%	ASTM D638
Flexural Modulus (23°C)	103	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	37	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	182	°C
1.8 MPa, Unannealed	51.1	°C
Peak Melting Temperature	220	°C	ASTM D3418

Extrusion	Nominal Value	Unit
Die Temperature	249 to 260	°C

Resin Grade	Manufacturer	Category	Trademark
Andur 8-6 APSLM/Curene® 49	Anderson Development Company	PUR-Ester/TDI	Andur
Chemlon® 230 MH	Teknor Apex Company (Chem Polymer)	Nylon 6	Chemlon®
GTPO™ 8202	S&E Specialty Polymers, LLC	TPO (POE)	GTPO™
KYOCERA KE-G1270	KYOCERA Chemical Corporation	Epoxy	KYOCERA
PLUSTEK PA355M6	Polyram Ram-On Industries	Nylon 66	PLUSTEK