Order Products : sales@su-jiao.com
Qenos PE HD0790
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Qenos PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3cytxu_Qenos-PE-HD0790.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HD0790 ia an injection molding grade of High Density Polyethylene with a good balance between flow and impact resistance. HD0790 is intended for use in production of moldings such as sealant cartridges, crates and closures. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 47.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.0 | MPa | ASTM D638 |
| Flexural Modulus | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (-30°C) | 32 | J/m | ASTM D256A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex AN2320SB | Ginar Technology Co., LTD. | Nylon 66/6 | Mapex |
| Sunny® PBT EB215 | Guangdong Shunde Shunyan New Material Co., Ltd. | PBT | Sunny® |
| Flontech® FT-WA15-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Hax™ HFX 519 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
| POLLITE 1001A | POLYROCKS CHEMICAL CO., LTD | PC | POLLITE |
