Category: | HDPE , High Density Polyethylene |
Manufacturer: | Bamberger Polymers, Inc. |
Trademark: | Bapolene® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | 3bPG0N_Bapolene-3255.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Narrow molecular weight distribution injection molding resin. This resin offers good impact strength, resistance to warpage, and stiffness. This product meets the Food and Drug Administration requirements of 21CFR177.1520. |
General Information | |
---|---|
Features |
|
Uses |
|
Agency Ratings |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.960 | g/cm³ | ASTM D1505 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness (Shore D) | 65 | ASTM D2240 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 1(Yield) | 30.0 | MPa | ASTM D638 |
Flexural Modulus - Tangent 2 | 1280 | MPa | ASTM D790 |
Note Message | |
---|---|
1 . | 50 mm/min |
2 . | Method I (3 point load) |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
NuSil CV-8251 | NuSil Technology | Silicone | NuSil |
ALKAMIX™ MB-AO370 | Marplex Australia Pty. Ltd. | MDPE | ALKAMIX™ |
ICORENE® 1314 | ICO Polymers EMEA, A Division of A. Schulman | LMDPE | ICORENE® |
ISPLEN® PP 084 Y1E | REPSOL | PP Homopolymer | ISPLEN® |
Grivory® HT XE 10811 NATURAL | EMS-GRIVORY | Nylon 6I/6T | Grivory® |