Order Products : sales@su-jiao.com
TAROPRENE® 1 D50 E1N
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Taro Plast S.p.A. |
| Trademark: | TAROPRENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3Qglvz_TAROPRENE-1-D50-E1N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoplastic Elastomer Vulcanized. This TPE-V compound combines the typical performance of a vulcanized elastomer with the easy processing of a thermoplastic compound. Taroprene is totally recyclable and it can be produced in standard grades and in tailor-made grades. Available in natural, black and colored grade. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 4.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 3 sec) | 50 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| 100% Strain | 13.1 | MPa | |
| 300% Strain | 13.4 | MPa | |
| Tensile Strength 2(Break) | 17.4 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 540 | % | ASTM D412 |
| Tear Strength | 102 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 180 to 240 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PULSE™ 630GF | Trinseo | PC+ABS | PULSE™ |
| Evoprene™ G 614 | AlphaGary | SEBS | Evoprene™ G |
| FARBOSET® 2461 | Cosmic Plastics, Inc. | Epoxy | FARBOSET® |
| Five Plus™ CPP40T | Noble Polymers | PP Copolymer | Five Plus™ |
| GLAMIDE® T-669VGB | TOYOBO America, Inc. | Nylon 66 | GLAMIDE® |
