Order Products : sales@su-jiao.com
Epolene® E-14
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3QAP8K_Epolene-E-14.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The Epolene E-14 is a low molecular-weight, low-density, oxidized polyethylene. It is useful as a lubricant in processing rigid and flexible polyvinyl chloride (PVC) and as a processing aid for preparing color concentrates. Epolene E-14 is listed with the National Sanitation Foundation (NSF) under Standard 61 Drinking Water System Components Health Effects. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Acid Number | 17.00 | mg KOH/g | |
| Molecular Weight 1 | 4000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 104 | °C | ASTM E28 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 400 | mm | ASTM D5 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (125°C) | 375 | mPa·s |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9727-77 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| TORZEN® U4630HSL NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| BMC 851 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| DOWLEX™ 2042E | The Dow Chemical Company | LLDPE | DOWLEX™ |
| Petrothene® NA340212 | LyondellBasell Industries | LDPE | Petrothene® |
