Order Products : sales@su-jiao.com
RELENE® E 41003
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3NmAdd_RELENE-E-41003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Relene E 41003 is a High Density Polyethylene grade with broad molecular weight distribution and good melt strength, suitable for making pipes for water supply, irrigation, sewage and industrial effluent as per IS 4984:1995, IS 14151:1995 and IS 14333:1996 respectively. The designation for Relene E 41003 as per IS 7328:1992 is PEEAA-45-T-012. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.943 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.28 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Injection Molded | 20.0 | MPa | |
| Ultimate, Injection Molded | 24.0 | MPa | |
| Tensile Elongation (Break, Injection Molded) | 500 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 700 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 124 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 301 LF | RTP Company | PC | RTP |
| SABIC® HDPE PCG80063 | SABIC Americas, Inc. | HDPE | SABIC® HDPE |
| Taitacell EPS 321T | Taita Chemical Company, Ltd. | PS (EPS) | Taitacell |
| NuSil MED4-4116 | NuSil Technology | Rubber | NuSil |
| EPT K-9720 | Mitsui Chemicals, Inc. | EPDM | EPT |
