Order Products : sales@su-jiao.com
Petrothene® XL07417
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3NAwYA_Petrothene-XL07417.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Petrothene XL07417 is a colorable, non-halogenated, flame retardant compound crosslinkable via continuous vulcanization (C.V.). Petrothene XL07417 is used in 125°C automotive wire & cable applications (SAE J1128/J1127). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.40 | g/cm³ | ASTM D1505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Compression Molded) | 17.6 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 240 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (165°C, 168 hr) | -1.0 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (165°C, 168 hr) | 1.0 | % | ASTM D573 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 107 - 113 | °C | |
| Cylinder Zone 2 Temp. | 107 - 113 | °C | |
| Cylinder Zone 3 Temp. | 107 - 113 | °C | |
| Adapter Temperature | 113 - 118 | °C | |
| Melt Temperature | 116 - 127 | °C |
| Extrusion instructions |
|---|
| Head Temperature: 235 to 245°FScrew Cooling: 180°F, if needed to control melt temperatureDie Cooling: 90 to 120°F to control die droolMaximum screen pack of 40 meshLittle or no die landNo predrying normally requiredCompression Ratio: 2 to 3:1Curing line steam temperature should be at least 400°F. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 200.5 | RTP Company | Nylon 66 | RTP |
| NILAMID® A3 H GF15 TP07S | Nilit Plastics | Nylon 66 | NILAMID® |
| Celstran® PA6-GF40-03 | Celanese Corporation | Nylon 6 | Celstran® |
| Fainplast PVC PH 75 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Larpeek 10 K/40 | LATI S.p.A. | PEEK | Larpeek |
