Order Products : sales@su-jiao.com
ICORENE® 3150
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3KMy3l_ICORENE-3150.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 3150 is a linear low density polyethylene specifically developed for rotational moulding. ICORENE® 3150 is a very fast processing material suitable for use in many different applications. It has a good balance of properties such as toughness, easy flow and stiffness. (ICORENE® 35150) |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 13 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 54 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 16.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 210 | % | ASTM D638 |
| Flexural Modulus | 550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 200 | J/cm | Internal Method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBE Polyamide Elastomer XPA 9040F1 | UBE Industries, Ltd. | TPA-ET | UBE Polyamide Elastomer |
| YUNGSOX® PP 1250D | Formosa Polypropylene | PP Homopolymer | YUNGSOX® PP |
| China PPS PTFE-hGR302 | Sichuan Deyang Chemical Co., Ltd | PPS | China PPS |
| DILAMID® 66 FV NATURAL 2808 | Dilaplast S.p.A. | Nylon 66 | DILAMID® |
| DynaChar™ 2430-TH | Polymer Dynamix | TPU, Unspecified | DynaChar™ |
