Order Products : sales@su-jiao.com
NuSil R-1130
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3K2X14_NuSil-R-1130.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.
General Purpose: Adhesives and Sealants Comment: Adhesive, Non-slump |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Spiral Flow | 1.27 | cm |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Tack Free Time | 25.0 | min |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Oxime | ||
| Operating Temperature | -50 to 200 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Translucent | ||
| Density | 1.10 | g/cm³ | |
| Curing Time (23°C) | 1.7E+2 | hr |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 35 | ||
| Lap Shear Strength 1 | 3.34 | MPa | |
| Tensile Strength | 5.86 | MPa | |
| Tensile Elongation at Break | 330 | % | |
| Tear Strength | 7.01 | kN/m |
| Note Message | |
|---|---|
| 1 . | Primed with SP-120 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zytel® 101F NC010 | DuPont Performance Polymers | Nylon 66 | Zytel® |
| Etinox® EI-7550 | Ercros, S.A. | PVC, Flexible | Etinox® |
| HiFill® PA6/6 HI BK | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| MAGNUM™ 8434 | Trinseo | ABS | MAGNUM™ |
| Plenco 07500 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
