Order Products : sales@su-jiao.com
Polene LDPE SSS 1018
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | TPI Polene Public Company Limited |
| Trademark: | Polene LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3GZaeF_Polene-LDPE-SSS-1018.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polene LDPE SSS 1018 is a Low Density Polyethylene material. It is available in Asia Pacific or North America for injection molding. Important attributes of Polene LDPE SSS 1018 are:
Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 45 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 3.0 | wt% | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 48 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 9.00 | MPa | |
| Break | 7.50 | MPa | |
| Tensile Elongation (Break) | 230 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 78.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E PVC GF-1831RS | S&E Specialty Polymers, LLC | PVC+NBR | S&E PVC |
| Mirakutoran® TPU E390PFAC | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| TRIREX® 3020HF | Samyang Corporation | PC | TRIREX® |
| CERTENE™ PBM-1NB | Muehlstein | PP Impact Copolymer | CERTENE™ |
| Plaslube® POM CO GM30 TL5 | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
