Order Products : sales@su-jiao.com
ETILINAS PC4020
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | POLYETHYLENE MALAYSIA SDN BHD |
| Trademark: | ETILINAS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3GTE4n_ETILINAS-PC4020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ETILINAS PC4020 is designed specifically for coating/cladding of metal pipes and tubes. ETILINAS PC4020 is based on a special medium dencity copolymer with exceptionally high resistance to environmental stress cracking and contains suitable additives necessary for ease of coating manufacture and to ensure long term weathering resistance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.947 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (F0) | 1000 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 1 sec) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 19.0 | MPa | ISO 527-2/2 |
| Tensile Strain (Break) | 600 | % | ISO 527-2/2 |
| Flexural Modulus | 750 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -100 | °C | ASTM D746 |
| Vicat Softening Temperature | 116 | °C | ISO 306/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength | 25 | kV/mm | ASTM D149 |
| Additional Information |
|---|
| Density of Compound, ISO 1872/1, Annealed: 949 kg/m³Carbon Black Content, ISO 6964: 2.25%Thermal Conductivity, BS 874, 23°C: 0.4 W/m/°COxidation Induction Time, ISO TR10837, 210°C: >20 min |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 200 - 225 | °C |
| Extrusion instructions |
|---|
| Suggested Screen Pack: 40/80 Mesh |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TPX® MX002O | Mitsui Chemicals, Inc. | PMP Copolymer | TPX® |
| AEI SX739:CM488-6 | AEI Compounds Limited | HDPE | AEI |
| Braskem PP FT120W2 | Braskem America Inc. | PP Homopolymer | Braskem PP |
| Catalyst CT/7 UV | Solvay Specialty Polymers | Polyolefin, Unspecified | Catalyst |
| LEXAN™ 143 resin | SABIC Innovative Plastics | PC | LEXAN™ |
