Order Products : sales@su-jiao.com
Somos® PerFORM
| Category: | Unspecified , Unspecified |
| Manufacturer: | DSM Somos® |
| Trademark: | Somos® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3FRcDu_Somos-PerFORM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Somos® PerFORM produces strong, stiff, high-temperature resistant composite parts on standard 355 nm stereolithography machines. This material's lower viscosity makes processing parts faster. It exhibits superior sidewall quality, along with excellent detail resolution compared to other composite stereolithography materials. Applications Somos® PerFORM is an easy to process material with excellent detail resolution. It is the ideal material for creating strong, stiff parts with excellent high heat resistance, including wind tunnel models for aerospace and automotive applications, as well as rapid tooling for injection molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.61 | g/cm³ | |
| Water Absorption | ASTM D570 | ||
| Equilibrium 1 | 0.10 | % | |
| Equilibrium 2 | 0.20 | % | |
| Viscosity (30°C) | 1.00 | Pa·s |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Poisson's Ratio | ASTM D638 | ||
| -- 3 | 0.32 | ||
| -- 4 | 0.33 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Critical Exposure | 7.80 | mJ/cm² | |
| Penetration Depth | 109.2 | µm |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore D 5 | 93 | ||
| Shore D 6 | 94 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D638 | ||
| -- 7 | 9800 | MPa | |
| -- 8 | 10500 | MPa | |
| Tensile Strength | ASTM D638 | ||
| -- 9 | 80.0 | MPa | |
| -- 10 | 68.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Break 11 | 1.2 | % | |
| Break 12 | 1.1 | % | |
| Flexural Modulus | ASTM D790 | ||
| -- 13 | 9030 | MPa | |
| -- 14 | 10000 | MPa | |
| Flexural Strength | ASTM D790 | ||
| -- 15 | 146 | MPa | |
| -- 16 | 120 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 17 | 20 | J/m | |
| -- 18 | 17 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 1.8 MPa, Unannealed 19 | 82.0 | °C | |
| 1.8 MPa, Unannealed 20 | 119 | °C | |
| Glass Transition Temperature | ASTM E1545 | ||
| -- 21 | 72.0 | °C | |
| -- 22 | 81.0 | °C | |
| CLTE - Flow | ASTM E831 | ||
| -40 to 0°C 23 | 2.6E-5 | cm/cm/°C | |
| -40 to 0°C 24 | 3.0E-5 | cm/cm/°C | |
| 0 to 50°C 25 | 3.4E-5 | cm/cm/°C | |
| 0 to 50°C 26 | 4.9E-5 | cm/cm/°C | |
| 50 to 100°C 27 | 6.0E-5 | cm/cm/°C | |
| 50 to 100°C 28 | 7.9E-5 | cm/cm/°C | |
| 100 to 150°C 29 | 8.1E-5 | cm/cm/°C | |
| 100 to 150°C 30 | 9.5E-5 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | ASTM D149 | ||
| -- 31 | 25 | kV/mm | |
| -- 32 | 26 | kV/mm | |
| Dielectric Constant | |||
| 60 Hz 33 | 4.00 | ASTM D150 | |
| 1 kHz 34 | 3.80 | ASTM D150 | |
| 1 kHz 35 | 3.90 | ASTM D150 | |
| 1 MHz 36 | 3.70 | ASTM D150 | |
| 1 MHz 37 | 3.60 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | UV Postcure & Thermal Postcure |
| 2 . | UV Postcure |
| 3 . | UV Postcure |
| 4 . | UV Postcure & Thermal Postcure |
| 5 . | UV Postcure & Thermal Postcure |
| 6 . | UV Postcure |
| 7 . | UV Postcure & Thermal Postcure |
| 8 . | UV Postcure |
| 9 . | UV Postcure & Thermal Postcure |
| 10 . | UV Postcure |
| 11 . | UV Postcure & Thermal Postcure |
| 12 . | UV Postcure |
| 13 . | UV Postcure & Thermal Postcure |
| 14 . | UV Postcure |
| 15 . | UV Postcure & Thermal Postcure |
| 16 . | UV Postcure |
| 17 . | UV Postcure & Thermal Postcure |
| 18 . | UV Postcure |
| 19 . | UV Postcure |
| 20 . | UV Postcure & Thermal Postcure |
| 21 . | UV Postcure |
| 22 . | UV Postcure & Thermal Postcure |
| 23 . | UV Postcure & Thermal Postcure |
| 24 . | UV Postcure |
| 25 . | UV Postcure & Thermal Postcure |
| 26 . | UV Postcure |
| 27 . | UV Postcure & Thermal Postcure |
| 28 . | UV Postcure |
| 29 . | UV Postcure |
| 30 . | UV Postcure & Thermal Postcure |
| 31 . | UV Postcure & Thermal Postcure |
| 32 . | UV Postcure |
| 33 . | UV Postcure & Thermal Postcure |
| 34 . | UV Postcure |
| 35 . | UV Postcure & Thermal Postcure |
| 36 . | UV Postcure & Thermal Postcure |
| 37 . | UV Postcure |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Dryflex® AM 65A202B | ELASTO | SEBS+SBS | Dryflex® |
| Kepital® F20-52SM | KEP Americas | Acetal (POM) Copolymer | Kepital® |
| Hypro® PPH-CC30 NATURAL | Entec Polymers | PP Homopolymer | Hypro® |
| Lifoflex® GC 1040 | Müller Kunststoffe GmbH | SEBS | Lifoflex® |
| LUVOCOM® 1105-7194/GY | LEHVOSS Group | PEEK | LUVOCOM® |
