Order Products : sales@su-jiao.com
ACCUCOMP™ LD0109L
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | ACLO Compounders Inc. |
| Trademark: | ACCUCOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3Efyi5_ACCUCOMP-LD0109L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ACCUCOMP™ LD0109L is a Low Density Polyethylene product. It is available in North America. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.6 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 40 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 320 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 10.0 | MPa | |
| Break | 8.00 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 27 | % | |
| Break | 110 | % | |
| Flexural Modulus | 300 | MPa | ASTM D790 |
| Flexural Strength | 9.00 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 45.0 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radiflam® S FR 137 NAT | Radici Plastics | Nylon 6 | Radiflam® |
| SLOVAMID® 66/6 GF 30 FRG 5 TS | Plastcom | Nylon 66/6 | SLOVAMID® 66/6 |
| OmniCarb™ PC/ABS 1412 CTI | OMNI Plastics, LLC | PC+ABS | OmniCarb™ |
| Petrothene® NA317 | LyondellBasell Industries | LDPE | Petrothene® |
| Sumiliteresin® PR-53123 | SBHPP | Phenolic | Sumiliteresin® |
