Order Products : sales@su-jiao.com
ResMart Ultra ABS HI LF
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | ResMart |
| Trademark: | ResMart Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3CkzAi_ResMart-Ultra-ABS-HI-LF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High impact, low flow ABS |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | |||
| 220°C/10.0 kg | 3.7 | g/10 min | ASTM D1238 |
| 220°C/10.0 kg | 5.4 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow (3.20 mm) | 0.40 - 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 | MPa | ISO 527-2/50 |
| Tensile Strength (Yield) | 39.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 50 | % | ASTM D638 |
| Flexural Modulus | |||
| -- | 2000 | MPa | ASTM D790 |
| -- | 2200 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 56.0 | MPa | ASTM D790 |
| -- | 67.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 36 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact | |||
| 23°C, 3.18 mm | 430 | J/m | ASTM D256 |
| 23°C, 6.35 mm | 360 | J/m | ASTM D256 |
| 23°C | 34 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 92.2 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 88.9 | °C | ASTM D648 |
| Vicat Softening Temperature | 97.2 - 98.9 | °C | ISO 306/B50 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 116 - 121 | °C | |
| Drying Time - Desiccant Dryer | 2.0 - 3.0 | hr | |
| Suggested Max Moisture | 0.15 | % | |
| Processing (Melt) Temp | 182 - 218 | °C |
| Injection instructions |
|---|
| Dew Point: -25°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Braskem PP FT120WB2 | Braskem America Inc. | PP Homopolymer | Braskem PP |
| CYCOLAC™ FXS610SK resin | SABIC Innovative Plastics Europe | ABS | CYCOLAC™ |
| Hanwha Total PP HF409 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| MACOMASS PVC MM-PVC I 1583 | MACOMASS Verkaufs AG | PVC, Flexible | MACOMASS PVC |
| ESTOPLAST XU 6800NN01 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
