Order Products : sales@su-jiao.com
RTP 6003-55A MD NATURAL
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3Ch6w4_RTP-6003-55A-MD-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ISO 10993 Tested |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.5 - 1.8 | % | ASTM D955 |
| Moisture Content | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peel Strength 1 | |||
| PC/PBT | 5.4 | kN/m | |
| PC/PMMA | 5.8 | kN/m |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Break, 3.20 mm) | 5.52 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 1000 | % | ASTM D412 |
| Tear Strength 4 | 30.6 | kN/m | ASTM D624 |
| Compression Set 5 | ASTM D395B | ||
| 23°C, 22 hr | 19 | % | ASTM D395B |
| 70°C, 22 hr | 65 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 76.7 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 193 - 238 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | 90°, 20 in/min, RTP 55, Interface Failure |
| 2 . | C mold, 500 mm/min |
| 3 . | Mouth die C, 500 mm/min |
| 4 . | C mould |
| 5 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHLEN M1452U | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| Torelina® A515 | Toray Resin Company | PPS | Torelina® |
| Abstron IMC25 | Bhansali Engineering Polymers Limited | PC+ABS | Abstron |
| Daelim Po1y® LL-05SC | DAELIM INDUSTRIAL CO., LTD. | LLDPE | Daelim Po1y® |
| Plaslube® PA6/6 GF30 TS1 BK | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
