Order Products : sales@su-jiao.com

Moplen HP741T

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	LyondellBasell Industries
Trademark:	Moplen
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	3CDdZb_Moplen-HP741T.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Lyondellbasell Australia's HP741T is an extra high flow homopolymer with a modified molecular weight. HP741T has been formulated for use in thin walled packaging containers where rapid cycle times are required together with consistent performance, rapid setup, and a balanced level of mechanical properties.

General Information
Additive	Nucleating Agent
Features	Fast Molding Cycle Food Contact Acceptable Good Moldability High Flow Homopolymer Nucleated
Uses	Containers Food Containers Thin-walled Containers
Agency Ratings	AS 2070-1999 FDA 21 CFR 176.170(c), Table 2, Cond. B FDA 21 CFR 176.170(c), Table 2, Cond. C FDA 21 CFR 176.170(c), Table 2, Cond. D FDA 21 CFR 176.170(c), Table 2, Cond. E FDA 21 CFR 176.170(c), Table 2, Cond. F FDA 21 CFR 176.170(c), Table 2, Cond. G FDA 21 CFR 176.170(c), Table 2, Cond. H FDA 21 CFR 177.1520(a) 1 FDA 21 CFR 177.1520(c) 1.1a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183/D
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	60	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	80		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	36.0	MPa	ISO 527-2
Flexural Modulus	1700	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (23°C)	1.8	kJ/m²	ISO 180/1A

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	98.0	°C	ISO 75-2/B
Vicat Softening Temperature	150	°C	ISO 306/A

Resin Grade	Manufacturer	Category	Trademark
SHIN-A SEY-170APM75	SHIN-A T&C	Epoxy	SHIN-A
Tenac™-C 4513	Asahi Kasei Chemicals Corporation	Acetal (POM) Copolymer	Tenac™-C
THERMOLAST® K TP6LDZ (Series: UV/LD/b)	KRAIBURG TPE	TPE	THERMOLAST® K
Arnitel® EL550	DSM Engineering Plastics	TPC-ET	Arnitel®
TECACOMP® PA66 CF15 black 4058	Ensinger GmbH	Nylon 66	TECACOMP®