Order Products : sales@su-jiao.com
KRATON® FG1901 G
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3BnDT1_KRATON-FG1901-G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below.
Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/5.0 kg) | 14 to 28 | g/10 min | ASTM D1238 |
| Maleic Anhydride Content - Bound | 1.4 to 2.0 | wt% | Internal Method |
| Solution Viscosity - Toluene, 25%wt (25°C) | 5.0 | Pa·s | Internal Method |
| Water Content | < 500 | ppm | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Styrene/Rubber ratio | 30/70 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 71 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 34.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3953CT | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Xuchuan XCD-651S | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| LARIPUR® LPR 6650 | COIM S.p.A. | TPU-Polyester | LARIPUR® |
| Orgalloy® RS 6635A | Arkema | Nylon 66 Alloy | Orgalloy® |
| ALTECH® PC + ABS ECO 1000/106 | ALBIS PLASTIC GmbH | PC+ABS | ALTECH® PC + ABS |
