Order Products : sales@su-jiao.com
RECLAIR® R 35042
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RECLAIR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 3BaM0E_RECLAIR-R-35042.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Reclair R 35042, is a medium density polyethylene grade designed for rotational moulding applications. Reclair R 35042 can be used for producing chemical tanks, water storage tanks, loft tanks, milk cans and pallets. Due to the medium density or resin, articles exhibit good toughness, impact resistance and environmental stress-crack resistance (ESCR). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Injection Molded | 14.0 | MPa | |
| Ultimate, Injection Molded | 25.0 | MPa | |
| Tensile Elongation (Break, Injection Molded) | 930 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 480 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 15.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 140 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 116 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MonoSol® E6030G | MonoSol, LLC | PVOH | MonoSol® |
| Talcoprene® 1020TC ARANCIO21 | SO.F.TER. SPA | PP Homopolymer | Talcoprene® |
| FORMULA P FIB 3620/L SC | Putsch Kunststoffe GmbH | PP, Unspecified | FORMULA P |
| Elastocon® 2825 | Elastocon TPE Technologies | TPE | Elastocon® |
| OXPEKK® MG300 | Oxford Performance Materials, Inc. | PEKK | OXPEKK® |
